Palm Coast Shutters offers the clear corrugated panels that allow light to enter so you can protect your property without feeling closed in. This product is so unobtrusive you may leave it in place during the most active part of the hurricane season. Our super lightweight lexan panels have no sharp edges, won't warp and store in a fraction of the space required for plywood.

Pricing:

Measuring Instructions:

For Panels: Measure the opening width and height If measuring a door be sure to measure height from the floor to top of opening (for mounting sill to floor). If door has steps, measure the height from the top of the step to the top of the opening(for mounting sill to top of front of steps).

Installation Instructions:

1. Locate center of window and mark.
2. Locate center of H-Header and mark.
3. Pre-drill starter holes in H-Header
4. Pre-drill holes in F-Track
5. Your H-Header comes pre-cut to fit your window
6. Drill the first hole for the H-Header
7. Drill in the first Tapcon screw
8. Level the H-Header and drill the remaining holes.
9. Line up the F-Track
10. Drill first hole in the F-Track.
11. Drill the first Tapcon in the F-Track
12. Level the F-Track and drill the remaining holes.
13. Slide the mounting screws into the F-Track
14. Put the panel in place
15. Wing nut the panels in place
16. The panels will overlap each other across the window